Wall jib crane with manual slewing KKR1

Photo/Video Reviews Certificates

Fill out the questionnaire

Download the questionnaire Download the catalog

Specifications

Load capacity, t.

up to 3.2

Console length, m.

up to 10.0

Lift height, m.

up to 36.0

Angle of rotation, dg.

up to 180

Type of drive

manual

Design number of full load cycles according to ISO 4301/1

A2 and above

Environmental class according to GOST 15150-69

U1 (outdoors) / U2 (under a canopy) / U3 (indoors)

The design of the crane

General-purpose industrial version / Fire-safe version / Explosion-proof version

Scope of delivery

boom (console) of the crane — 1 pc.
hoist (when delivered complete with a hoist)
power supply to the crane (in case of delivery of the crane with this option and the presence of any electrical equipment in the crane (for example, hoists)
power supply to the hoist (in case of delivery of the crane with this option)
other parts (the list of components depends on the configuration and set of options of the crane you ordered and may differ from the one given in this section of the site)
crane documentation (passport, crane operation and installation manual, passports and instructions for individual crane components manufactured at other enterprises and supplied with this crane, packing list, waybill).

The above configuration is basic and may differ significantly from the actual one. If you need complete information on this issue, please contact the nearest sales department.

List of additional options

By default, cranes are manufactured as standard. But depending on their technical characteristics and operating conditions, the plant manager may recommend supplementing the standard equipment with one or another set of options. Below is a brief description of them and the validity of the installation.

Name of the option	Description of the option
Load capacity limiter	It is used as an additional safety device along with limit switches and a load drop protection device in case of phase breakage. It is installed, as a rule, in cases where work is carried out with different loads, the mass of which is not always known. If the weight of the load exceeds the lifting capacity of the hoist, the limiter blocks the lifting process. The option is available for cranes equipped with an electric hoist, since the limiter is mounted on the lifting mechanism of the hoist.
Carport for parking hoists when performing "On the street"	They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation.
A canopy for a hoist for the entire length of the span when performed "On the street"	They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation.
Electric limit switches for the movement of hoists along the crane boom	They are used to limit the path of the electric hoist along the crane console.
Platform and ladder for maintenance of hoists and crane components	When ordering a jib crane with a height of more than 3 meters, it is recommended to immediately provide ways of servicing the hoist, oil change and other maintenance operations. One of the options is to install a horizontal platform on the column at a human-height distance from the console and a ladder welded to the crane column leading to this platform.
Rigid removable/non-removable stops for limiting the angle of rotation of the boom	Rigid removable /non-removable stops for limiting the angle of rotation of the boom are used mainly for jib cranes KKR3 and KKM7 to adjust the angle of rotation of the console. They are installed on the ring that wraps around the crane column. Two rigid stops limit the angle of rotation of the boom in both directions. On wall-travelling cranes, the stops are welded to the crane boom and can provide only 1 option for the angle of rotation of the boom.

Description

A wall jib crane with a manual slewing KKR1 carries out the movement of the load by rotating the boom of the crane, fixed to the wall with the help of brackets. This type of lifting equipment has found its application in various industries, at cargo terminals, as well as in warehouses. Operation is allowed both in indoor areas and on outdoor areas equipped with a canopy. Installation of any model of cantilever cranes of this type is possible only on the supporting structure. Electric or manual hoists are used to lift the load.

The "Gruzopodyem" plant has been specializing in the production of crane equipment for more than 15 years and produces wall jib cranes with manual traction in accordance with regulatory documents.

Operation of a pillar jib crane at the Customer's enterprise

Get a consultation

Write to us in a convenient way

Wall jib crane with manual slewing KKR1, design and operation features

It is used for lifting and moving any cargo weighing up to 3.2 tons
It is an arrow that rotates around its axis at an angle of up to 180 degrees, with a set of fasteners
The mechanism for lifting and moving the load is a hoist (tal), which moves along the boom of the crane
It is attached directly to the supporting column or to the wall of the building by means of anchor bolts.
Turning the boom of hand cranes is carried out by means of a drawbar. Lifting and lowering of the load takes place either manually or with the help of an electric mobile hoist and a control panel
To increase the reliability, safety, and convenience of operation under certain operating conditions, it is recommended to install additional options
The advantage of cantilever cranes over overhead cranes is the convenience of working in a limited working area, ease of installation, no need to provide crane tracks.

You can buy a manual cantilever wall crane or calculate its cost by calling the sales departments of our factory, sending an application by email or filling out a questionnaire.