- Home
- Products
- Crane equipment
- Jib cranes
- Special-purpose jib cranes
- Wall jib crane double-arm and with the manual slewing
Wall jib crane double-arm and with the manual slewing
| Name of the option | Description of the option |
| Load capacity limiter | It is used as an additional safety device along with limit switches and a load drop protection device in case of phase breakage. It is installed, as a rule, in cases where work is carried out with different loads, the mass of which is not always known. If the weight of the load exceeds the lifting capacity of the hoist, the limiter blocks the lifting process. The option is available for cranes equipped with an electric hoist, since the limiter is mounted on the lifting mechanism of the hoist. |
| Carport for parking hoists when performing "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| A canopy for a hoist for the entire length of the span when performed "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| Platform and ladder for maintenance of hoists and crane components | When ordering a jib crane with a height of more than 3 meters, it is recommended to immediately provide ways of servicing the hoist, oil change and other maintenance operations. One of the options is to install a horizontal platform on the column at a human-height distance from the console and a ladder welded to the crane column leading to this platform. |
| Rigid removable/non-removable stops for limiting the angle of rotation of the boom | Rigid removable /non-removable stops for limiting the angle of rotation of the boom are used mainly for jib cranes KKR3 and KKM7 to adjust the angle of rotation of the console. They are installed on the ring that wraps around the crane column. Two rigid stops limit the angle of rotation of the boom in both directions. On wall-travelling cranes, the stops are welded to the crane boom and can provide only 1 option for the angle of rotation of the boom. |
Wall jib crane double-arm and with the manual slewing with a manual drive for turning the boom is designed for mechanization of lifting and moving various loads. The equipment can be used indoors and outdoors at temperatures from -20 °C to +40 °C and -40 °C on request.
The double-arm boom design allows you to increase the working area and perform specific operations, such as moving cargo through doorways and over obstacles, as well as lifting loads in hard-to-reach places. The main part of the boom has a rotation angle of up to 180 °, and the auxiliary - up to 270 °.
Our company produces Wall jib crane double-arm and with the manual slewing according to TU-31 5920-006-87879481-2023 with a lifting capacity of up to 0.5 tons and a boom reach of up to 4.0 meters. The hoist in this type of crane can only be used stationary (not mobile).
Wall jib crane double-arm and with the manual slewing, design and operation features
- It is used for lifting and moving any cargo weighing up to 0.5 tons
- It is mounted to load-bearing columns or to walls capable of withstanding the load that a loaded crane gives
- Turning the boom of hand cranes is carried out by means of a drawbar
- The mechanism for lifting and moving the load is a telfer (tal)
- Lifting and lowering of the load is carried out manually or with the help of an electric mobile hoist and a control panel
- The advantage of special jib cranes over overhead cranes is the convenience of working in a limited working area, ease of installation, no need to provide crane tracks
- Double-arm jib cranes have a special design, thanks to which the crane boom can provide lifting and moving of goods in hard-to-reach places.
The color of the equipment may differ from the one shown on the website.
If you want to buy a Wall jib crane double-arm and with the manual slewing, make a price calculation of this type of crane, specify the configuration or find out information about additional options — call the sales offices of LLC "Gruzopodyem" at the phone numbers listed on the website.
The plant "Gruzopodyem" has all the permits for the equipment produced. In addition to manufacturing the crane itself, our company provides delivery and installation of equipment at the Customer's enterprise.