- Home
- Products
- Crane equipment
- Jib cranes
- Wall jib cranes
- Wall jib crane with electric slewing drive KKM5
Wall jib crane with electric slewing drive KKM5
- crane boom (console) — 1 pc.
- crane control box (with the exception of cranes in the VZI version)
- gear motor 1-2 pcs. (depending on the boom departure and lifting capacity of the crane)
- cable products
- hoist (when delivered complete with a hoist)
- power supply to the crane (optional)
- power supply to the hoist (optional)
- other parts (the list of components depends on the configuration and set of options of the crane you ordered and may differ from the one given in this section of the site)
- crane documentation (passport, crane operation and installation manual, passports and instructions for individual crane components manufactured at other enterprises and supplied with this crane, packing list, waybill).
The above configuration is basic and may differ significantly from the actual one. If you need complete information on this issue, please contact the nearest sales department.
Name of the option | Description of the option |
Load capacity limiter | It is used as an additional safety device along with limit switches and a load drop protection device in case of phase breakage. It is installed, as a rule, in cases where work is carried out with different loads, the mass of which is not always known. If the weight of the load exceeds the lifting capacity of the hoist, the limiter blocks the lifting process. The option is available for cranes equipped with an electric hoist, since the limiter is mounted on the lifting mechanism of the hoist. |
Sound and light alarms | The alarm is activated when the jib crane is turned on, warning employees to leave the danger zone. Depending on the conditions of the working area, it is recommended to install a light or sound alarm. The option is available only for electric jib cranes. |
Radio control | Allows you to control the crane from a distance using the remote control. The option is available for electric jib cranes or for cranes equipped with an electric hoist. The package includes a 6-button remote control with an emergency stop button, a radio signal receiver (installed on the hoist or on the crane control box or next to the control box). |
Electric motor with boom turn brake | The built-in brake allows you to stop the crane boom in the right place of non-stop movement of the equipment by inertia. It is impossible to manually fix the console at a strictly necessary point. Visually, the brake on the crane structure is not visible, since it is an element of the gearbox motor design. The option is recommended to be installed for cranes with the placement category U1 and U2 to prevent spontaneous movement of the boom in the parking position with wind gusts and other external factors. |
Carport for parking hoists when performing "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
A canopy for a hoist for the entire length of the span when performed "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
Power off on the crane column | Allows you to turn on/off the tap power. It is located at a height of about 1500 mm from the lower flange of the crane. It is a two-button post in a protective (metal) casing. |
Electric limit switches for the movement of hoists along the crane boom | They are used to limit the path of the electric hoist along the crane console. |
Load drop protection device in case of phase breakage | An additional safety device along with a load capacity limiter and limit switches. |
Logger of crane operation parameters | Registers the operating conditions of the crane, including modes, duration and volume of loading. It is installed only when the crane is equipped with an electric rope hoist. |
Crane operating time indicator | Controls the operating time of the crane, allowing time to carry out the necessary maintenance, maintenance and overhaul. It is built either into the door of the crane control box, or inside it. |
Frequency control of the boom rotation speed | The frequency converter is installed in the crane control box for the possibility of adjusting the boom rotation speed in a certain range. It can also perform smooth start and braking. |
Engine cooling system | It is recommended to use when installing a frequency converter, which will significantly limit the standard speed of movement of the crane, to prevent overheating of electric motors. |
Input throttle | Smoothes the front and reduces the amplitude of the emission of bursts of alternating power supply voltage. Reduces the amplitude of the ripple current consumed by the frequency converter from the mains. |
Platform and ladder for maintenance of hoists and crane components | When ordering a jib crane with a height of more than 3 meters, it is recommended to immediately provide ways of servicing the hoist, oil change and other maintenance operations. One of the options is to install a horizontal platform on the column at a human-height distance from the console and a ladder welded to the crane column leading to this platform. |
Heated crane control box | Allows you to operate a jib crane at air temperatures up to -20 g. C (inclusive). It is required to be installed on all cranes that are operated at an air temperature below -10 g. s. Requires additional installation of a frequency converter. |
The wall jib crane with electric slewing has found its application in small-sized and height-limited workshops and warehouses. Use it where it is impossible to install overhead cranes and other lifting mechanisms. Its strengths include low weight and compact size, as well as versatility, practicality and high performance. The operating mode of the cantilever wall crane is regulated by ISO 4301/1. Electric wall cranes are manufactured by our factory, by default, with the A4 operating mode or other required by the Pump.
The company "Gruzopodyem" has all the necessary permits for the production of this equipment in general industrial, fire-proof and explosion-proof versions. We also provide services for the delivery and installation of cranes at the Customer's enterprise.
Wall jib crane with electric slewing drive KKM5, design and operation features
- It is used for lifting and moving any cargo weighing up to 3.2 tons
- It is an arrow that rotates around its axis at an angle of up to 180 degrees, a set of fasteners, a gear motor
- It is attached directly to the supporting column or to the wall by means of anchor bolts.
- The mechanism for lifting and moving the load is a hoist (tal), which moves along the boom of the crane
- The electric crane is controlled by a 6-button cable remote control with an emergency stop button. It is possible to install the radio control option for remote operation with the crane
- Depending on the operating conditions, the manager can recommend a number of options for installation that increase the productivity and safety of working with the crane
- The advantage of cantilever cranes over overhead cranes is the convenience of working in a limited working area, ease of installation, no need to provide crane tracks.
- The need to move cargo over a short distance often arises in modern warehouses located both indoors and outdoors. This operation is part of the production process that ensures the production of heavy machinery and metalworking products. For its implementation, special lifting equipment is used – wall-mounted electric cranes with an arrow. They are allowed to be used at ambient temperatures from -20°C to +40°C (on request from -40°C).
This type of crane is installed on a load-bearing wall or column that has increased resistance to loads. Lifting and moving the load is provided by a rotating boom. Its rotation is possible up to 180 degrees. It is restricted to the approach to the column. It is controlled by a radio channel or a push-button remote control. Lifting and lowering of the load is provided by a manual or electric hoist.
You can buy a wall jib crane with electric slewing drive or calculate its cost by calling the sales departments of our factory, sending an application by email or filling out a questionnaire.