- Home
- Products
- Crane equipment
- Mobile crane installations
- Mobile crane installation MCI
Mobile crane installation MCI
Name of the option | Description of the option |
Load capacity limiter | It is used as an additional safety device along with limit switches and a load drop protection device in case of phase breakage. It is installed, as a rule, in cases where work is carried out with different loads, the mass of which is not always known. If the weight of the load exceeds the lifting capacity of the hoist, the limiter blocks the lifting process. The option is available for cranes equipped with an electric hoist, since the limiter is mounted on the lifting mechanism of the hoist. |
Sound and light alarms | The alarm is activated when the crane is turned on, warning employees to leave the danger zone. Depending on the conditions of the working area, it is recommended to install a light or sound alarm. The option is available only for electric cranes. |
Radio control | Allows you to control the crane from a distance using the remote control. The option is available for electric cranes or for cranes equipped with an electric hoist. The package includes a 6-button remote control with an emergency stop button, a radio signal receiver (installed on the hoist or on the crane control box or next to the control box). |
Electric motor with brake for movement | An electric motor with a movement brake is used to fix an electric crane in a resting position. Prevents spontaneous movement under the influence of wind gusts, earthquakes and other factors. |
Carport for parking hoists when performing "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
A canopy for a hoist for the entire length of the span when performed "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
Electric limit switches for the movement of hoists along the crane span | They are used to limit the path of the electric hoist along the crane span. |
Frequency control of the crane movement | The frequency converter is installed in the crane control unit for the possibility of adjusting the speed of movement of the crane in a certain range. It can also perform smooth start and braking. |
Engine cooling system | It is recommended to use when installing a frequency converter, which will significantly limit the standard speed of movement of the crane, to prevent overheating of electric motors. |
Heated crane control box | Allows you to operate a crane at air temperatures up to -20 g. C (inclusive). It is required to be installed on all cranes that are operated at an air temperature below -10 g. s. Requires additional installation of a frequency converter. |
Mobile crane installations MCI are designed to perform loading and unloading operations in places unsuitable for the installation of stationary lifting equipment. For example, at construction sites, in places where buildings are repaired or dismantled. To ensure the performance of short-term work, light collapsible crane installations are used. They are also called mobile cranes. Structurally, MCI are similar to gantry cranes, but they have smaller dimensions, lower load capacity and span length, while MCI are equipped with wheels, so they can move along any given trajectory.
The equipment lifts and moves a load weighing up to 5.0 tons over a short distance. There are also models of wheeled gantry cranes with a load capacity increased to 10.0 tons. They can be used both indoors and outdoors. Our factory manufactures mobile crane installations with manual and electric drive in accordance with the technical regulations of the Customs Union 010/2011 "On the safety of machinery and equipment", and also provides services for the delivery and installation of crane installations at the Customer's enterprise.
Mobile crane installation MCI, design and operation features
- The mechanism of lifting and moving the load is a telfer (hoist), which moves along the span of the MCU. The load-grabbing body is a hook suspension suspended on a rope cable
- It is widely used in manufacturing enterprises for performing repair, loading and unloading operations and other purposes
- Easy-to-move design
- It does not require the installation of crane tracks or other additional equipment
- It is designed to work with loads weighing up to 5.0 tons (up to 10.0 tons on request).
The main feature of the design of mobile crane installations is the way they are moved - on wheels. It largely determines their advantages and functional characteristics. Our company supplies crane installations with two types of wheels: for moving on a flat concrete floor and for moving on rails. The wheels can be pivoting and non-pivoting. The swivel wheels have parking brakes, which provide the installation with additional stability during operation.
The color of the equipment may differ from the one shown on the website.
If you want to buy a mobile crane installation of the MCI, calculate its cost, specify the configuration or find out information about additional options, call the sales offices of LLC "Gruzopodem" at the phone numbers listed on the website.
Our factory has all the permits for the manufactured equipment. We also provide services for the delivery and installation of MCI at the site of future operation.