Load capacity 20.0 tonn

We accept orders for the production of double-girderoverhead cranes with a lifting capacity of 20.0 tons. We develop from scratch or according to customer drawings. We adapt serial models. The equipment is used for loading and unloading, construction, installation and repair work. For loads of high intensity, it is possible to install two lifting mechanisms. Such a modification allows operations to be carried out even more efficiently and faster, correctly distributing the load and saving equipment life.

The design consists of two load-bearing beams along which the hoist or hoist moves and two end beams laid along the perimeter of the building on its load-bearing elements. The bridge is installed on the rail tracks from above and ensures the safety of the cargo even with excessive load. In case of a negative conclusion of the examination for the installation of equipment, we offer the construction of independent overpasses, which are used when operating equipment on the street. Overhead  double-girder overhead cranes cover up to 42.0 m of working area and lift loads up to 36.0 m. Available with electric drive only. Controlled by cable remote control, by radio or from the operator's cab. Designed for operation in the range from -20 °C to +40 °C and from -50 to +60 °C on request.

We have been working since 2008 and during this time we have gained a lot of experience, which allows us to provide high quality equipment at affordable prices. We cooperate with the world's best suppliers of electrical components from Europe, Russia and China. We always offer the best option for solving your production problems. We have the necessary documentation for FTI execution. We check welds in our own certified non-destructive testing laboratory according to the NAKS system. We produce according to TU 28.22.14-015-87879481-2018 in accordance with the Technical Regulations of the Customs Union 010/2011. We deliver and install lifting equipment on the territory of the Russian Federation and the CIS countries.

• the span of the crane (may consist of 1, 2 or 3 parts, depending on the length) — 2 pcs.
• walk-through gallery along one side of the crane spane (in some cases, two walk-through galleries are supplied, which are installed on both sides of the crane span) - 1-2 pcs.
• end beam — 2 pcs. (some models of cranes are supplied with 4 pcs.)
• crane control box — 2 pcs. (the quantity can be changed depending on the set of options and technical characteristics)
• gear motor for the crane stroke - 2 pcs. (some models of cranes are supplied with 4 pcs.)
• gear motor for the crane trolley - 2 pcs. (some models of cranes are supplied with 4 pcs.)
• cable products
• trolley with lifting mechanism (lifting mechanism can mean both a stationary hoist and a classic deployed lifting mechanism) — 1 pc.
• the end beams of the crane trolley (supplied separately in the case of the manufacture of a trolley with oversized dimensions and the impossibility of its delivery in the usual way) — 1 pc.

• current supply to the crane and hoist (if necessary according to the technical specification)

• other parts (the list of components depends on the configuration and set of options of the ordered crane and may differ from the one given in this section of the site)
• documentation for the crane (passport, operating and installation manual for the crane, passports and instructions for individual crane components manufactured at other enterprises and supplied with this crane, packing list, bill of lading).

The above configuration is basic and may differ significantly from the actual one. If you need complete information on this issue, please contact the nearest sales department.